SLE 280 A2
GB
│
MT
│
45
■
Cleaning and changing the filter
The performance of the appliance also depends upon how clean the filter is.
■
The plastic filter
9
should be washed every 2 weeks.
■
The carbon filter
10
should be cleaned every 2 weeks and changed every 6
months.
NOTE
►
You can purchase new carbon filters in almost all shops selling household
goods. The carbon filter mats just need to be cut to size.
♦
Switch the appliance off and remove the mains plug.
♦
Remove the water tank
5
from the appliance.
♦
To remove the air inlet grille
8
, three plastic lugs located at the base of the
air inlet grille
8
must be pressed upwards slightly to allow release.
♦
Remove the air inlet grille
8
in a downwards motion.
♦
To remove the plastic filter
9
, two plastic lugs located at the base of the
plastic filter
9
must be pressed downwards slightly to allow release.
♦
Now, remove the plastic filter
9
including the plastic frames from the appli-
ance by pulling it downwards.
♦
The carbon filter
10
is also located behind the plastic filter
9
.
♦
Start by removing the plastic filter
9
from the plastic frame by lifting it care-
fully out from under the retaining tabs in the plastic frame.
♦
Now remove the carbon filter
10
.
♦
Wash down both filters with lukewarm water.
♦
Allow both filters to dry completely before re-inserting the filter in the
appliance.
♦
To insert, follow the reverse sequence.
8
9
10
