Silvercrest SKA 1000 A1, Operating Instructions Manual

Page: 26 / 35

GB
│
23 ■ SKA 1000 A1
Setting the time
1) Press the AUTO/PROGRAMM button . The display
3
will read CLOCK.
2) Within 10 seconds, press the STD button in order to set the desired time
in hours:
–
press the STD button repeatedly until the desired number of hours is
shown in the display
3
.
Alternatively,
–
Press and hold the STD button until you reach the desired number of
hours. This will cause the hour display to cycle faster.
3) Once you have set the desired number of hours, press the MIN button in
order to set the minutes:
–
Press the MIN button repeatedly until the desired number of minutes
is shown in the display 3 .
Alternatively,
–
Press and hold the MIN button until you reach the desired number of
minutes. This will cause the minute display to cycle faster.
4) Once you have set the desired time, wait for 10 seconds without pressing any
buttons. The display
3
will no longer show CLOCK. The time has been saved.
Before first use
CAUTION – PROPERTY DAMAGE!
► Never fill more than 8 cups of water into the water tank ! (MAX mark).
► A small hole is located on the back of the appliance. It is a water overflow ,
which prevents excessive amounts of water from being filled into the machine.
If the water level exceeds the MAX mark, the water will escape through the
water overflow
onto the worktop.
► If the water tank ! is full (8 cups of water) and the appliance is moved,
water may spill through the water overflow .
► Never fill the water tank with less than 2 cups of water
!
.
Use the water level gauge on the water tank
!
.
1) Unscrew the lid and remove it from the vacuum flask .
2) Carefully rinse the vacuum flask with water.
3) Open the appliance lid and remove the filter holder
.
from the appliance.