16 GB/CY
Before use
Only use the product with dry hands .
Remove all parts from the package .
Inserting / replacing batteries
Switching off the product: Slide down the slide switch 3 to the
“0” position .
Put the protective lid 9 on the roller 1 / 8 . Hold the main
housing 5 firmly . Slide the battery compartment cover 6 off
the main housing .
Remove the used batteries, if present .
Insert 2 new batteries (type AA, LR6) into the battery
compartment 11 .
Pay attention to the correct polarity . This is indicated on the front
side of the battery compartment 11 .
Slide the battery compartment cover 6 back onto the main
housing 5 .
Operation
Switching on the product: Press the safety button 4 .
Simultaneously, slide up the slide switch 3 to the required speed
level .
Note:
We recommend that you start working at speed level “I” .
If the results are satisfactory – and you feel comfortable handling
the product – then you may switch up to speed level “II” .
Apply the roller 1 / 8 slowly and carefully with only a little
pressure to the callus, which is to be removed .
