Silvercrest SHBR 560 B1, Operating Instructions Manual

Page: 12 / 260

GB
│
IE
│
9 ■ SHBR 560 B1
Filling the fresh water tank
ATTENTION! PROPERTY DAMAGE!
► Fill the fresh water tank
q
only with cold to warm tap water
(up to max. 60°C) or distilled water.
Do not use boiling water.
► Never operate the appliance without water in the fresh water tank
q
.
► Use only standard commercial, non-foaming floor cleaners as cleaning
agents.
Ƈ Grasp the fresh water tank
q
by the gripping grooves on the side and pull it
upwards out of the appliance (see fig. 6).
Ƈ Flip the fresh water tank
q
over and unscrew the lid. (see fig. 7).
Fig. 6 Fig. 7
Ƈ For small areas (up to 25 m2), fill the fresh water tank
q
with tap water
or distilled water up to the first fill level marking (see fig. 8).
Ƈ
For small areas (up to 25 m2), fill the fresh water tank
q
with cleaning
solution up to the second fill level marking (see fig. 8).
Ƈ
For large areas (up to 55 m2), fill the fresh water tank
q
with tap water
or distilled water up to the third fill level marking (see fig. 9).
Ƈ
For large areas (up to 55 m2), fill the fresh water tank
q
with cleaning
solution up to the fourth fill level marking (see fig. 9).