Silvercrest SHBR 560 B1, Operating Instructions Manual

Page: 27 / 260

■ 24
│
GB
│
IE
SHBR 560 B1
Fault Cause Remedy
The appliance
does not
dispensing
enough clean-
ing solution.
The fresh water
tank
q
is empty.
Fill up the fresh water tank
q
(see section
Filling the fresh water tank ).
The fresh water
tank
q
is not closed
properly.
Take the fresh water tank
q
out of the
appliance and tighten the lid (see section
Filling the fresh water tank ).
The appliance is not
completely ready for
use.
Before each use, press and hold the cleaning
solution switch
t
for about 10 seconds to
add cleaning solution to the rotary brush
6
so that it is ready for use.
The continuous spray
function is not activated.
Press the cleaning solution switch
t
twice
briefly to activate the continuous spray function
and continuously apply cleaning solution to the
brush roll
6
.
The splash guard
7
is not fitted properly.
Fit the splash guard
7
properly (see section
Manual cleaning ).
The rotary
brush
6
is not
turning.
The rotary brush
6
is
not fitted properly.
Switch the appliance off and pull out the mains
plug.
Fit the rotary brush
6
properly onto the foot
section
3
(see section Manual cleaning ).
The rotary brush
6
is
blocked.
Remove the plug from the mains power socket.
Remove the splash guard
7
and the rotary
brush
6
to clear the blockage.
Fit the rotary brush
6
and the splash guard
7
back onto the appliance (see section Manual
cleaning )
.
Insert the plug into a mains power socket and
switch on the appliance.
Water is leak-
ing from the
appliance. The fresh water
tank
q
is not closed
properly.
Take the fresh water tank
q
out of the
appliance and tighten the lid (see section
Filling the fresh water tank ).