GB
│
IE
│
59
■
SEMM 1470 A1
Cleaning the espresso sieves, sieve holder and
espresso outlet
Remove all used powder from the espresso sieves
/
after every drink prepa-
ration.
Clean the espresso sieves
/
, the sieve holder
,
and the espresso outlet
-
regularly.
1) After you have prepared espresso/cappuccino/latte macchiato and removed
the sieve holder
,
:
–
Fix the espresso sieve in place by flipping the sieve blocker
upwards
and holding it in place.
–
Knock the espresso powder out of the espresso sieve
/
.
–
Flip the sieve blocker
back down again.
–
Remove the espresso sieve
/
from the sieve holder
,
.
–
Clean the espresso sieve
/
and the sieve holder
,
in warm water
with a little mild washing-up liquid. Rinse all the parts off afterwards
using clean water.
NOTE
►
The espresso sieves
/
are also suitable for cleaning in the dishwasher.
2) Replace the sieve holder
,
in the appliance without the espresso sieve
/
.
3) Fill the water tank
6
with water (approx. 200 ml).
4) Place a suitably large, empty container onto the drip grille
.
5) Switch the appliance on using the on/off switch
%
and wait until all control
lamps light up permanently.
6) Press the “Small” espresso button
.
. The water comes out of the espresso
outlet
-
and rinses out the pipes. As soon as the water stops coming out of
the espresso outlet
-
, the cleaning process is complete.
NOTE
►
If you want to descale the water tank
6
and the pipes, proceed as
described in the section "Descaling mode".
NOTE
►
You can store the sieve holder
,
and the espresso sieves
/
in the
holders
1
next to the water tank.
Summary of Contents for SEMM 1470 A1
Page 3: ...A 0 6 1 B C 3 ...
