■
58
│
GB
│
IE
SEMM 1470 A1
3) Then press the positioning lever
+
and the milk nozzle
at the same time
towards the recess on the milk tank lid
so that they disconnect.
4) Pull the milk nozzle
with the positioning lever
+
downwards and out of
the milk tank lid
.
5) Undo the silver attachment on the milk nozzle
(see section “Setting the
milk nozzle”) and pull it downwards and off.
6) Clean the silver attachment and the milk nozzle
that you have removed
from the milk tank lid
along with the positioning lever
+
in warm water
with a little washing-up liquid. Rinse all parts afterwards with plenty of clean
water.
7) Afterwards, replace the silver attachment onto the milk nozzle
and set it
at the desired height (see section “Setting the milk nozzle”).
8) Push the milk nozzle
and the positioning lever
+
back into the milk tank
lid
and push the connector assembly all the way back into the appliance.
Summary of Contents for SEMM 1470 A1
Page 3: ...A 0 6 1 B C 3 ...
