Silvercrest SEMM 1470 A1, Operating Instructions Manual

Page: 50 / 228

GB │ IE │ 47 ■ SEMM 1470 A1
Preparing espresso
1) Ensure that there is enough water in the water tank
6
. Add more water if
necessary.
2) Select whether you want a single or double espresso and fit the corresponding
espresso sieve / or in the sieve holder , .
3) Add the espresso powder to the espresso sieve / and fit the sieve
holder
,
.
4) Pull the tray for small cups out of the appliance.
5) Place a suitable cup on the tray for small cups .
6) Switch the appliance on using the on/off switch
%
and wait until all control
lamps light up permanently. The appliance has now heated up.
7) Press the “Small” espresso button . if you want to prepare a single espresso.
The control lamp for the “Small” espresso button
.
lights up. Press the
“Double” espresso button if you want to prepare a double espresso.
The control lamp for the “Double” espresso button lights up.
8) The appliance starts the brewing process; the corresponding control lamp
flashes during the preparation.
9) Wait until the espresso has stopped flowing out of the espresso outlet
-
and
all control lamps light up. You can now remove your espresso.
NOTE
► You can stop the preparation at any time by pressing any button.
10) Switch the appliance off using the on/off switch
%
.
11) Clean the appliance as described in the section “Cleaning and Care”.
NOTE
► If you do not turn off the appliance with the on/off switch
%
, the appliance
will switch itself into power saving mode automatically after approx. 15
minutes if no other button is pushed. If you want to make another drink,
simply press any button. The appliance heats back up.