GB
│
MT
│
65
■
SEM 1100 C3
Cleaning and care
WARNING! RISK OF INJURY!
►
Always remove the plug from the mains power socket before you clean the
appliance. Risk of electric shock!
►
Always allow the appliance to cool down before cleaning it. Risk of burns!
Never immerse the appliance in water or other liquids! Risk of electric
shock!
CAUTION! PROPERTY DAMAGE!
►
To avoid damage, never use abrasive, aggressive or chemical cleaning
agents to clean the surfaces of the appliance.
Cleaning the milk frother
1) Place an empty container under the milk frother
0
.
2) Immediately after use, turn the steam control
7
to the “
“ position
and allow the steam to escape for a few seconds.
3) Turn the steam control
7
off (as far as it will go in the direction “▯“), switch
the appliance off and remove the plug from the mains power socket.
4) Allow the nozzle to cool down.
5) Pull the casing of the milk frother
0
off (Figure 1) and clean it thoroughly in
warm water.
6) Wipe the nozzle under the casing with a damp cloth. If necessary, add a little
mild detergent onto the cloth. After cleaning with detergent, always wipe off
with a cloth moistened with clean water. Ensure that there is no detergent
residue left on the nozzle.
7) Push the casing back onto the nozzle (Figure 1).
IB_353468_SEM1100C3_LB5.indb 65
21.12.2020 16:10:45
