Silvercrest SDKT 1.76 A1, User Manual And Service Information

Page: 140 / 156

SilverCrest SDKT 1.76 A1
English - 138
Record Memo
After the confirmation tone you can record a message on the answer machine. Press the right display
button [3] to save the message.
You can also record messages directly on the base. Press and hold the Next button [21] of
the base for at least 3 seconds to start recording. Press the Stop button [15] to stop
recording.
Outgoing Msg
The answer machine contains pre-recorded welcome messages (outgoing messages). However, you
may record a custom message at any time.
To record a custom outgoing (welcome) message, select the Record Message menu item, or select
Play Message to listen to the recorded message.
In both cases you can select one of the following outgoing messages:

Answer & Record
After this outgoing message, the caller can leave a message for you.

Answer Only
After this outgoing message, the caller is not able to leave a message.
If you record a message, it will be played once automatically.
You set the outgoing message to be played in the answer machine settings under the
Answer Mode item.
Answer Machine Settings (Ans Settings)
Here you can configure your answer machine.
Answer Mode
This lets you select the answer machine operating mode.

Answer & Record

With this setting, the caller can leave a message for you after this outgoing message. Answer
Only
This setting does not allow the caller to leave a message after the outgoing message.
Press the

or

directional control buttons [4] to select the desired mode. To save the selected
setting, press the right display button [3].