Silvercrest SDKT 1.76 A1, User Manual And Service Information

Page: 144 / 156

SilverCrest SDKT 1.76 A1
English - 142
Bs Ringer Volume
You can adjust the ringer volume of the base in 5 levels (5 = very high; Off = no ringtone). Press the

or

directional control buttons [4] to set the desired volume. To save the selected setting, press the
right display button [3].
Keypad Beep
Press the

or

directional control buttons [4] to enable or disable the keypad beep. To save the
selected setting, press the right display button [3].
Confirm Beep
Press the

or

directional control buttons [4] to enable or disable the confirm beep. To save the
selected setting, press the right display button [3].
Telephony
Dial Mode
There are two different dial modes that you can use with your telephone.

Tone
Tone dialling is the most popular dialling method nowadays.

Pulse
Pulse dialling is normally used with older devices.
Press the

or

directional control buttons [4] to select the desired dial mode. To save the selected
setting, press the right display button [3].
Auto Talk
If the handset is on the base when an incoming call arrives, the call can be accepted automatically by
removing the handset from the base. Press the

or

directional control buttons [4] to switch this
function on or off. To save the selected setting, press the right display button [3].
Recall
You can use the Recall button ( ) of the directional control [4] during a call for switching to an internal
conversation or to forward the call when using the device with a PBX. The Recall button ( ) will cause
a short, temporary line interruption.