Silvercrest SDKT 1.76 A1, User Manual And Service Information

Page: 146 / 156

SilverCrest SDKT 1.76 A1
English - 144
Everyday Use
Making Calls
External Calls
Use the numeric buttons [6] to enter a telephone number. After you have entered the phone number,
press the Dial button [11] to call the entered number.
Press the left display button [12] to clear an entered digit. Keep the left display button
[12] pressed to clear all entered digits.
Calling a Number from the Phonebook
If you want to use a number stored in the phone book, press the left display button [12] while in
standby mode. Press
the

or

directional control buttons [4] to select the desired entry and then
press the Dial button [11] to call the selected entry.
Press the End call button [5] to hang-up.
For more information about adding a new phone book entry, please read the chapter
phonebook on page 126.
Internal Calls
If you have registered multiple handsets with your base you can make internal calls. To do this, press
the
button on the directional control [4]. “Internal” is shown on the display. Next enter the
number of the handset that you want to call. The connection will be established immediately after
entering the handset number.
Redial
Press the button on the directional control [4] to show a list with the last ten dialled phone numbers.
To call the last dialled phone number again, just press the Dial button [11], as the last phone number is
already highlighted.
To call any other number of the list, press the

or

directional control buttons [4] to select the
desired number and then press the Dial button [11] to call it.