Silvercrest SCA 5.00 A1 63671, User Manual And Service Information

Page: 183 / 195

SilverCrest SCA 5.00 A1 Connectors and Ports
4. Select the HDMI signal source corresponding to the above input
connectors on your TV set. If necessary, read the User Manual
of your TV set for more information on how to do this.
5. Press the On/Off button (18) to power the camcorder on. The
device display remains off while the picture will be shown on the
TV screen.
While the camcorder is connected to the TV via the
HDMI cable, video recording and photo capture are
not available. It is only possible to play already-
recorded content.
Connecting via the USB/AV Cable
1. Please make sure that your camcorder is powered off.
2. Open the port cover and insert the connector of the USB/AV
cable into the USB/AV port (8) of your camcorder (see also
page 142 – Rear Panel).
3. Insert the AV connector into the corresponding inputs of your
TV set (yellow connector to VIDEO IN, white connector to
AUDIO IN). The USB connector on the same end of the cable is
not needed for this connection type. Please also consult the
User Manual of your TV set for more information.
English - 181