SBTF 10 D4
■
38
│
GB
│
IE
♦
Press the
button again for about 3 seconds to
switch off the hands-free set. You will hear a low beep
and the operating/charging LED lights up briefly
orange before going out completely. The hands-free set
is now switched off.
Pairing the hands-free set with a compatible
mobile phone
Before you can use the hands-free set, you must pair it with a
compatible mobile telephone.
♦
Switch the hands-free set on. After a short time, the op-
erating/charging LED flashes alternately blue and
orange. You will hear two high beeps. The hands-free
set is now in pairing mode for about 2 minutes. If the
pairing does not happen within this time, you will hear
a low beep and the hands-free set switches off.
♦
Set the mobile telephone so that it scans for
Blue-
tooth
®
devices. A detailed description of how to do
this can be found in the operating instructions for your
mobile telephone.
♦
Select the entry
SBTF 10 D4
from the list of found de-
vices on your mobile phone to pair the two devices. The
name of the hands-free set
SBTF 10 D4
now appears
on the list of paired devices on your mobile phone.
NOTE
►
If you are asked to enter a PIN during pairing, enter
0000
.
►
If the pairing is successful, you will hear a short beep.
♦
The hands-free set is now in standby mode and the
operating/charging LED flashes blue every 10 sec-
onds. If the connection to the mobile phone is lost, the
operating/charging LED flashes briefly blue every
10 seconds.
Summary of Contents for SBTF 10 D4
Page 10: ......
