Silvercrest SBTF 10 C2, Operating Instructions Manual

Page: 16 / 130

13 SBTF 10 C2
GB
IE
Charging 5 V Devices
Ɣ Check the max. input voltage (5V) and the max. power
input (1000 mA) of the device which you want to charge.
For this, consult the operating manual of the device.
Ɣ Connect the device to be charged with the USB port
on the hands free device. The device now receives its
power supply from the hands free device. If the device
is equipped with a charging indicator light, this will in-
dicate that the device is being charged.
Note:
If the power supply does not activate automatically, you
should disconnect the USB cable from the USB port
and re-connect it.
Troubleshooting
If you cannot connect the hands-free appliance with a
compatible mobile telephone, proceed as follows:
Ɣ
Ensure that the
Bluetooth
®
function in the mobile
telephone is activated.
Ɣ Is the display flashing? Ensure that the hands-free ap-
pliance is correctly installed, switched on and supplied
with electricity.
Ɣ
If you use several
Bluetooth
®
appliances, ensure that
a previously created
Bluetooth
®
connection of the
mobile telephone is separated. This may indicate that
a previously paired device is in range.
Ɣ
Ensure that the hands-free appliance is distanced a ma-
ximum of 10 metres from the mobile telephone and that
there are no barriers or electronic devices between them.