GB
IE
8
SBTF 10 C2
Switching the hands-free
appliance on and off
Switching on:
The appliance is switched off.
Ɣ
Press and hold the multi-function button
for 3 sec-
onds, until a short and high signal tone is heard. The
LED status indicator
blinks twice every 3 seconds.
Note:
The hands-free set switches on automatically as soon as it
is connected to a power supply.
Switching off:
The appliance is in standby mode.
Ɣ
Press and hold the multi-function button
for 5 seconds,
until a long and deep signal tone is heard. The LED
status indicator
extinguishes.
Coupling the hands-free appliance
with a mobile telephone
The hands-free appliance has been especially developed
for mobile telephones that support the
Bluetooth
®
Profile
“Handsfree (HFP) and Headset (HSP)“. Further informa-
tion about
Bluetooth
®
radio technology is to be found
in the operating instructions for your mobile telephone.
Before you can use the hands-free appliance, you must
connect it with a compatible mobile telephone (pairing).
Ɣ
Check to make sure the mobile telephone is switched on.
Ɣ
Programme the mobile telephone so that it searches
for
Bluetooth
®
appliances. A detailed description of
how to do this is to be found in the operating instruc-
tions for your mobile telephone.
Ɣ
Ensure that the hands-free appliance is correctly set up
and switched off.
Ɣ
To switch the device off, press and hold the multi-function
button
for about 5 seconds. A long, low signal
tone will be heard and the LED status indicator
extinguishes.
Summary of Contents for SBTF 10 C2
Page 3: ......
Page 55: ...52 SBTF 10 C2 ...
Page 109: ...106 SBTF 10 C2 ...
Page 129: ...126 SBTF 10 C2 ...
