GB
│
IE
│
9
■
SAST 18 A1
ATTENTION! PROPERTY DAMAGE!
►
The batteries in this appliance cannot be replaced .
►
UN 34811
Tel. ____________
The product is equipped with or supplied with
a lithium-ion battery . Do not throw the batteries
into a fire and do not subject them to high
temperatures . There is a risk of explosion!
The mains adapter is for indoor use only .
Before first use
1) Remove all packaging materials from the appliance .
2) Check whether the filter holder
u
and the HEPA filter
z
are firmly installed
in the dirt container
i
. They may have worked loose during transport .
To insert the filter holder
u
and the HEPA filter
z
into the dirt container
i
,
proceed as follows:
–
The filter holder
u
can only be fitted in the dirt container
i
in one
position . The side labelled “UP” must be facing upwards . Push the filter
holder
u
as far as possible into the dirt container
i
. Make sure that
the filter holder
u
is straight and that the rubber lip seals the dirt
container
i
.
–
Insert the HEPA filter
z
into the filter holder
u
so that the catches on
the HEPA filter
z
fit into the corresponding recesses on the filter
holder
u
. The arrow on the HEPA filter
z
must be aligned with the
arrow on the filter holder
u
. Turn the HEPA filter
z
clockwise towards
the symbol .
3) Place the dirt container
i
on the motor unit
r
:
–
First, place the contacts on the underside of the dirt container
i
onto
the contact pins on the underside of the motor unit
r
. This pushes the
two catches on the motor unit
r
into the recesses on the dirt
container
i
.
–
Press the upper side of the dirt container
i
against the upper side of
the motor unit
r
so that the catch audibly engages . The dirt
container
i
is now firmly seated on the motor unit
r
.
