■
10
│
GB
│
IE
SAST 18 A1
Information about the batteries
■
The appliance runs on rechargeable lithium-ion batteries . Before using the
appliance for the first time, the batteries must be charged . The charge
indicator lamp
w
flashes red during charging . As soon as the batteries are
fully charged, the charge indicator lamp
w
lights up green .
■
If the charge indicator lamp
w
flashes alternately green and red, the battery
is almost completely discharged and the appliance switches off after approx .
1 minute . This protects the appliance from deep discharge .
Installation of the wall bracket
DANGER! ELECTRIC SHOCK!
►
Ensure that there are no power cables or water pipes in the wall at the
location where you intend to drill the holes for the wall bracket
7
.
Drilling into a current-carrying electric cable can be potentially fatal!
1) Select a suitable installation location for the wall bracket
7
:
It must be possible to remove the handheld vacuum cleaner easily and there
must be a mains power socket nearby . In addition, there should be no power
or water lines in the wall .
2) Drill two holes below each other at a distance of approx . 110 mm from each
other . The drill holes must be suitable for 6 mm wall plugs .
3) Push in the wall plugs and screw in the screws so that the heads protrude a
few millimetres .
4) Hang the wall bracket
7
with the drill holes over the two screws and ensure
that the screws slide into the slots . The wall bracket
7
should lie flush
against the wall . You can adjust the distance to the wall and compensate for
any unevenness in the wall by screwing in or unscrewing the screws .
5) Ensure that the power cable is not trapped and that it lies properly in the
cut-out .
6) Push the two accessories holders
8
into the respective catches on the left
and right of the wall bracket
7
. You can place the nozzles in the
accessories holders
8
.
7) Place the barrel plug
9
of the power adapter
0
into the wall bracket
7
from below . Secure the barrel plug
9
by turning it .
8) Plug the mains adapter
0
into a power socket .