Silvercrest LT 710, User Manual And Service Information

Page: 8 / 75

SilverCrest LT 710 English
5
ƒ the device is not subject to any great temperature changes as this may
cause moisture through condensation and short-circuit;
ƒ the device is not subject to excessive shocks and vibrations;
Cables
Always hold cables by the plug and never pull on the cable itself. Never hold
the power cord with wet hands as this may cause a short circuit or electric
shock. Never place the device, heavy objects or furniture on the cable and
take care that the cord does not become trapped, especially at the plug and
sockets. Never make knots in the cable and do not tie it together with other
cords. All cables should be positioned so that nobody can trip over them or
be obstructed by them. A damaged power cord can cause a fire or an electric
shock. Inspect the power cord from time to time. Do not use any adapter plug
or extension cable that does not meet the required safety standards.
Plug-type Power Supply and Rechargeable Battery
Insert the rechargeable battery with the correct polarity. Never throw a
rechargeable battery into fire. Remove the rechargeable battery when the
device is not to be used for a long time.
Danger of Explosion!
Non-intended use may cause explosion and danger to life. Only replace the
rechargeable battery with an equivalent or a type recommended by the
manufacturer. Never replace the battery in an explosion-sensitive
environment. While inserting or removing the battery a spark may be
produced causing an explosion. Explosion-sensitive areas will normally (but
not always) be labelled. These include any fuel storage areas such as below
deck on a boat, fuel line or tank areas, environments where the air contains
inflammable substances (e.g. cereals, metal dust or powder, etc.) and any
areas where you should normally switch off your car engine.
Respect the environment. Old rechargeable batteries do not belong in with
domestic waste. They must be handed in to a collection point for old
batteries.