Silvercrest LT 710, User Manual And Service Information

Page: 24 / 75

SilverCrest LT 710 English
21
Sort
You can use this option to automatically sort the channels "By Name", "By
Service ID" or "By Channel No.". Then the Program Editing table will open.
Program Search
To store all available channels in the Program List you can perform an
automatic channel search (recommended) or a manual channel search.
Automatic Search
After selecting the Automatic Search you need to confirm the prompt "Do you
want to start Auto Search ?".
ƒ To do so, press LEFT (8) to move the yellow highlight onto "OK". If you
don't want to perform the automatic channel search, leave the yellow
highlight on "Cancel".
ƒ Press the OK button (20) to confirm your selection.
If a channel list already exists, the prompt "Do you want to erase your
previous channel list ?" will appear.
ƒ Select "Yes" to confirm and to replace the existing list by the new search
results.
ƒ Or select "No" to append the found channels to the existing list.
The automatic channel search begins. This process may take a few minutes.
During this process, the display will show the progress. Furthermore, all TV
and radio stations found so far will be listed.
When the channel scan is completed, the menu will close and the last found
channel will be shown.
Manual Search
For a manual search you must know the channel of the desired station.
ƒ Press LEFT (8) or RIGHT (19) to select a channel between 5 and 69.
Or press the OK button (20) and directly enter a channel number via the
numeric buttons (11). Press the OK button (20) again to confirm the
setting.
ƒ Press DOWN (9) to navigate to the "OK" button and press OK (20) to
confirm.
ƒ If a programme is broadcasted on the selected channel, it will be stored.