Silvercrest LT 710, User Manual And Service Information

Page: 31 / 75

English SilverCrest LT 710
28
Preset
Under Preset you can store the available stations. To receive any stations,
use the supplied antenna or, if any, your outdoors antenna or cable box.
To store all available channels you can perform an automatic channel search
or a manual channel search.
Auto Search
Press UP (7) or DOWN (9) to select the "Auto Search" item and press
RIGHT (19) to launch the channel search. The device will search the entire
frequency band and store any found stations automatically. After the channel
scan has finished the live TV picture will appear.
To cancel the search at any time, press MENU (6).
Manual Search
It is not mandatory to know the broadcasting frequency of the station for
performing a manual search, as this feature also includes a channel scan.
The difference to the automatic channel search is that here you can
determine the channel order and perform a fine tuning, if necessary. For
manual search, proceed as follows:
ƒ Under "Position", select a memory preset where you want to store the
station.
ƒ
Move to the "Search" option and start the search from the specified
frequency by pressing the RIGHT button (19).
ƒ As soon as a station ahs been found, the scan will stop. If necessary, use
the "Fine" option to perform a fine tuning.
ƒ If you want to store the found channel at the given memory preset, set the
"Remember" option to "On". Otherwise navigate to the "Search" option
and press RIGHT (19) again to continue scanning.
ƒ Repeat the above steps until all desired stations have been stored.