15
GB/CY
Before getting started / Operation
Before getting started
Removing the battery fuse
Push the battery compartment lid
10
downwards.
Pull the tab of the protective fi lm out of the battery
compartment.
Push the battery compartment lid
10
onto the battery
compartment until it clicks into place (Fig. A).
– When it is switched on, an internal alignment and a
self-test of the LC display are carried out.
– In order to check if all bars of the numbers are activated
correctly, please check the image of the display of
your appliance with the sample (Fig. B) when you
switch the appliance on.
Operation
Setting the date / time (Fig. C)
You only have to set the date and time when you operate
the appliance for the fi rst time and after you change the
battery.
1. Press and hold the “MEM / SET” button
1
down for
two seconds in standard mode. An acoustic signal
will sound. The device is now in set-up mode.
2. Press the “MEM / SET” button
1
to choose between
the 12-hour or 24-hour format.
IB_61572_KH8105_LB7.indd 15
IB_61572_KH8105_LB7.indd 15
10.12.2010 14:29:43 Uhr
10.12.2010 14:29:43 Uhr
