SilverCrest SFB 10.1 C3
100 - English
3. Press
, select “CODE SET” and press
to confirm.
4. Then press the device button
or
that you wish to
program and press
to confirm.
5. The first digit of the 4-digit device code currently set flashes.
6. Enter the correct 4-digit code for the selected device using the
number buttons, then enter the number of the corresponding code list
(0 to 7) and press
to confirm.
7. Press
to confirm the entry. The display reads “SUCCESS”
followed by “CODE SET”.
8. Invalid CODES cannot be found in the CODE list. If you enter an
invalid code “NOT FOUND” appears on the display and you can
then enter the correct code.
Press
to go back one menu level. To return to the start window,
press one of the device buttons. On the left of the time the code assigned
to the device button
or
is shown on the display. The
selected code list (0 to 7) is also displayed to the left of the day of the
week.
Before you can program the device buttons
or
using the
brand code search or automatic search, it is necessary to assign the code
list to the device button. To do so, proceed as described in the previous
section, select the number 0001 as your code and select the number of
the desired code list (0 to 7). This assigns the code list to the device
button
or
so you can proceed with programming.
At this point, programming the device buttons
or
works
the same way as described in the “Automatic code search (AUTO
SRCH)” and “Brand code search (BRAND SRCH)” chapters.
System configuration (CONFIGURE)
Setting the time (TIME SETUP)
1. Press and hold the
button for 3 seconds.
2. Press
, select “CONFIGURE” and press
to confirm.
3. Press
, select “TIME SETUP” and press
to confirm.
4. Press
, select between “12HR” and “24HR”.
5. Press
to toggle to time setting mode. The hour display flashes.
6. Press
and select the correct value for the hour. You
can also adjust the value by using the numeric keypad (11).
7. Press
to toggle to minute setting mode.
8. Press
and select the correct value for the minutes. You
can also adjust the value by using the numeric keypad (11).
9. If you selected “12HR” in step 4, you can press
to select the
PM/AM setting. Press
to toggle between PM and
AM.
10. Press
to confirm your entry and save the setting. The display
reads “SUCCESS” followed by “TIME SETUP”.
Press
to go back one menu level. To return to the start window,
press one of the device buttons.
Summary of Contents for 90255
Page 1: ......
Page 2: ......
Page 3: ...V 1 63 Deutsch 2 Français 30 Italiano 59 English 86 ...
Page 114: ......
