- 8 -
Drip-stop function
With conventional steam irons it can occur that water
drips from the ironing sole
q
at low temperatures.
However, this iron possesses a new equipment cha-
racteristic, the DRIP-STOP function. At low tempera-
tures the iron automatically switches off the steam-
blast function. When this happens, a "CLICK" is
heard. You must then select a suitable temperature
using the thermostat
8
. As soon as this is reached,
steam production continues.
Automatic switch-off
The iron is equipped with an automatic switch-off.
This stops the iron from heating up.
If the iron is standing on its ironing sole
q
and has
not been moved for approx. 30 seconds, acoustic
warning signals are heard and the automatic switch-
off indicator lamp
6
flashes. The iron will no longer
be heated. To deactivate the automatic switch-off,
pick up the iron and move it around a little. The
automatic switch-off indicator lamp
6
will go off
and the iron will heat up again.
If the iron is standing on its base
0
and has not
been moved for approx. 8 minutes, acoustic warning
signals are heard and the automatic switch-off indi-
cator lamp
6
flashes. The iron is no longer heated.
To deactivate the automatic switch-off, pick up the
iron and move it around a little. The automatic
switch-off indicator lamp
6
will go off and the iron
will heat up again.
Note:
The automatic switch-off is not a substitute for un-
plugging the apparatus from the power supply! It is
only intended for reducing the risk of fire if the iron
is accidentally left on!
Cleaning
Self-cleaning function
• Fill the water tank to the "MAX" marking.
• Insert the plug into a wall socket.
• Move the thermostat
8
to the "MAX" position.
• Adjust the steam regulator
3
to maximum steam
power.
• Allow the steam iron to heat up until the tempera-
ture control lamp
7
switches off and once
again glows.
• Hold the steam iron horizontally over a catchment
receptacle.
• Position the steam regulator
3
at the maximum
steam power level. Press and hold down the
self-clean button
w
. Thereby, steam and boiling
water flows from the steam exit holes in the ironing
sole
q
. Impurities that may be present are was-
hed out.
• Release the self-clean button
w
as soon as all
of the water has exited.
• Thoroughly dry the ironing sole
q
. For this, slide
the ironing sole
q
back and forth over a hand
towel or an old piece of material several times.
• Allow the steam iron to cool down before placing
it in storage.
Summary of Contents for 85032
Page 3: ......
