72 GB/MT
j
Hold the hair and beard clippers with the front pointing upwards.
j
Use moderate force to press the cutting edges downwards
(see Figs. B+C).
j
Clean the hair and beard clippers with the cleaning brush.
j
Push the projection of the cutting attachment
8
under the edge of
the casing (see Fig. D).
j
Press the cutting edges of the cutting attachment
8
downwards
until you can hear it click into place.
Note:
The trimmer head
2
may only be cleaned with medical
alcohol. Do not use water or any other liquids.
Q
Oiling the trimmer head
j
only use acid-free oil, e.g. sewing machine oil.
j
Remove the comb attachment
1
from the device as described in
the section called “Cutting without an attachment”.
j
Press the trimmer head
2
downwards (see Figs. B+C) and
remove it.
j
Put one or two drops of oil between the blades and distribute the
oil evenly.
j
Replace the shaver head
2
and the comb attachment
1
again.
j
Wipe off excess oil with a cloth.
Q
Disposal
Protect the environment!
This hair and beard clippers has two integrated ni-MH rechargeable
batteries inside it.
Cleaning and care / Disposal
