69
GB/MT
j
Make sure that you can feel the two mounting ribs of the comb
click into place on the fixing attachments
4
on the sides of the
trimmer head.
j
Choose the length setting you wish to have (4 - 32 mm) by sliding
the comb attachment up and down the trimmer head.
j
Switch on the hair and beard clippers by pushing the on / oFF
switch
5
up.
j
Run the hair and beard clippers slowly though your hair.
j
When doing so, hold the hair and beard clippers in such a way
that the comb attachment
1
lies as flat as possible.
j
Always cut from the nape of the neck in the direction of the top of
the head or from the forehead and temples upwards towards the
centre of the head.
Note:
In order to improve cutting performance, place a drop of oil on
the shaver head
2
. This is particularly recommendable after cleaning.
Wipe excess oil away with a cloth (see also section called “Cleaning
and care”).
Q
Thinning out hair
This tool reduces the volume of the hair to produce a modern, straggly
look without altering the length of the hair.
j
In order to thin the hair out, push the slide button
3
to the left; the
thinning function
2
integrated in the trimmer head will then
extend upwards.
Use
