USER INSTRUCTIONS:
Activate hair dryer by removing the handle. The Elite 2000 offers
three-step adjustable air volume and temperature setting.
Avoid directing the airflow towards your eyes.
Do not obstruct free airflow.
Keep the dryer at an adequate distance from your hair.
Always replace handle onto housing after use.
MAINTENANCE:
Clean plastic parts with a cloth wrung in soapy water.
Do not use corrosive cleaning products.
VARIANT OF THE DAN DRYER
®
ELITE 2000 CLASSIC:
Model
SHAVER
is equipped with a 115-230 V shaver plug for electric
razors – and razors only!
IMPORTANT!
This product is covered by the WEEE regulations on the recycling and
recovery of waste electrical and electronic equipment.
This product is not to be treated as household refuse.
This product must be recycled if possible.
Contact local authorities for advice.
The product may also be returned to the manufacturer/distributor free
of charge. The manufacturer/distributor will ensure proper recycling/
disposal.
INSTALLATION &
USER INSTRUCTIONS
DAN DRYER® ELITE 2000 HAIR DRYER
CLASSIC & SHAVER
DAN DRYER A/S
Alsikevej 8 • DK-8920 Randers NV • Tel.: +45 86 41 57 11 • Fax: +45 86 41 60 89
