Silvercrest 385824 2107, Operating Instructions Manual

Page: 14 / 52

GB
│
IE
│
NI
│
CY
│
11 ■ SPM 220 A1
NOTE
► The following parts are also suitable
for cleaning in the dishwasher: lid
2
, dough container
t
, bracket
w
,
dough shaft
0
, dough shaft support
q
,
kneading hook
9
, shaping disc fixture
r
,
shaping discs
8
, measuring beaker
u
/
i
,
dough scraper
p
, cleaning tool
a
, ravioli
attachment
o
.
If possible, place all the parts in the upper
basket of the dishwasher and make sure that
they are not jammed in place.
► For stubborn dough residues on the shaping
discs
8
, try the following method: Place the
shaping discs
8
in the freezer for 1–2 hours.
It should then be easy to remove the dough
residues using the cleaning tools
p
/
a
.
3) Dry all parts thoroughly before reassembling
them.
Storage
♦ Store the shaping discs
8
, the dough
scraper
p
and the cleaning tool
a
in the
drawer
7
on the side of the appliance.
♦ Store the cleaned appliance in a dust-free
and dry location with the lid
2
closed.
Troubleshooting
The appliance is not working:
■ The power plug is not connected to the mains
power.
♦ Insert the plug into a mains power socket.
■ The appliance has been in operation for more
than approx. 35 minutes and the overheating
protection has been activated.
♦ Unplug the appliance from the mains socket and
allow it to cool down for about 90 minutes
before using it again.
■ The appliance is defective.
♦ Contact the Customer Service department.
The machine suddenly stops in the middle
of operation:
■ The appliance has been in operation for more
than approx. 35 minutes and the overheating
protection has been activated.
♦ Unplug the appliance from the mains socket and
allow it to cool down for about 90 minutes
before using it again.
Error code "OPEN":
■ The lid
2
is not closed properly or the accesso-
ries are not mounted correctly. You hear several
beeps when the programme starts and
OPEN
appears on the display a .
♦ Now close the lid
2
.
♦ If the lid
2
is properly closed, unplug the appli-
ance and check that the accessories are
correctly fitted.
Error code "OUL":
■ The pasta dough is too dry and cannot be
dispensed.
OUL appears on the display a .
♦ Start a new kneading process and add a little
liquid after starting the programme. Then start
another dispensing process and check whether
the pasta dough is now better dispensed.
The pasta dough is not dispensed at all/
not properly dispensed:
■ The pasta dough may be too moist.
♦ Add a little flour and start a new kneading
process. Then start another dispensing process
and check whether the pasta dough is now
better dispensed.
IB_385824_SPM220A1_LB6-.indb 11 14.10.2021 09:11:07