Silvercrest 384143 2107, Operating Instructions And Safety Instructions

Page: 12 / 222

GB
│
IE
│
9 ■ SMS 300 B2
1) Plug the power plug into a properly installed, easily accessible wall outlet.
2) Place the appliance flat on the surface to be cleaned.
3) To switch the appliance on, push the On/Off switch
2
forwards. The
appliance starts vacuuming.
4) Press the vibration button
w
to activate the vibration head
7
. The vibration
shakes up the surface to be cleaned and the swirled up dust is sucked in
through the suction opening
9
. Pressing the vibration button
w
also switches
on the UV-C lamp
8
.
5) Move the appliance evenly over the surface to be cleaned.
6) After vacuuming, push the On/Off switch
2
back to switch off the
appliance.
7) Unplug the appliance from the mains socket.
Usage recommendations
Ƈ
Always clean mattresses from both sides.
Ƈ New mattresses should be cleaned once a month. Older mattresses should
first be cleaned daily for one week. Afterwards, cleaning should take place
once a month.
Ƈ The HEPA dust filter
4
should be changed every 12 –18 months depending
on use, the UV-C lamp
8
every 12 – 24 months. If you have any questions
about spare parts, please contact customer service (see section
Service
).
Cleaning
RISK OF ELECTRIC SHOCK!
► Before cleaning the appliance, disconnect the power plug from the power
socket. Otherwise, there is a risk of electrocution.
CAUTION! PROPERTY DAMAGE!
► Do not use abrasive, aggressive or chemical cleaning agents.
They can damage the surface and also lead to irreparable damage to the
appliance.
Ƈ Clean the appliance only with a soft cloth lightly moistened with water.
Ƈ
Empty the dust container
3
after each use of the appliance.
The HEPA dust filter
4
must also be cleaned regularly to avoid overloading
the motor.