Silvercrest 373080 2104, Operating Instructions Manual, Page: 16 / 202

GB │ IE │ 13 ■ SNAW 1000 D2
NOTE
► If "E" appears on the display
3
after entering a value, the value was
too high. The following maximum values can be entered:
PROT (protein) 500.00 g
FAT 500.00 g
CARB (carbohydrates) 500.0 g
KCAL (kilocalories) 5000
CHOL (cholesterol) 5000 mg
► The appliance automatically calculates the values for kilojoules and
bread units from your entries.
The nutrition/energy value displays
e
now show all of the values, and the
food is now stored under the selected code.
10) Repeat steps 2) - 9) if you wish to enter more codes.
11) Enter the food in the appropriate field in the food tables of these operating
instructions.
NOTE
► You can also overwrite one of your previously saved codes by simply reas-
signing the code number and saving the new nutritional values under this
code.
► To stop saving your personal codes, press the ON/OFF button
9
to
switch off the appliance.
Replacing the batteries
If the appliance no longer works reliably, the display
3
becomes unreadable,
and/or “Lo” appears on the display, this means the batteries are exhausted and
need to be replaced with new batteries of the same type.
1) Open the battery compartment
2
, remove the used batteries and dispose of
them in an environmentally friendly manner.
2) Insert two new 3 V CR2032 button cell batteries as per the polarity diagram
in the battery compartment
2
.
3) Close the battery compartment
2
. The battery compartment lid must click
into place.