Silvercrest 373080 2104, Operating Instructions Manual, Page: 12 / 202

GB │ IE │ 9 ■ SNAW 1000 D2
Operation
Weighing items
1) Press the ON/OFF button
9
to switch on the scales.
The start display appears briefly, then “0 g” is shown automatically.
CAUTION
Excess or incorrect loads will cause irreparable damage to
the appliance.
► Never place food weighing more than 5 kg (11 lb) on the weighing
plate . In cases of doubt, first weigh heavy food using more sturdy
scales.
► Do not place any objects or food on the display or the buttons.
2) If you wish to weigh food without a container, place the food on the weighing
platform
1
. The weight is displayed.
If you wish to weigh the food in a bowl/container, first place the empty
bowl/container on the weighing platform
1
. Press the TARE
7
button. The
display
3
shows “0 g”
q
and “T”
z
appears on the display
3
. Place the
food in the bowl/container. The weight of the food is displayed.
Adding further items (tare)
To weigh several different substances (e.g. various ingredients for a dough)
in combination, you can set the scales to 0 each time before adding a further
substance.
■ If you wish to reset the scales to “0 g” after the first measurement in order to
measure the next ingredient, press the
TARE
button
7
. The display
3
shows
“0 g”
q
and “T”
z
appears on the display
3
.
Displaying nutritional and energy values
1) Place the food on the weighing platform
1
.
2) Look up the appropriate code for the food to be weighed from the food list
provided at the end of these instructions.
3) Enter the 3-digit code using the number buttons
4
, e.g. 024. All nutritional
and energy values of the respective food appear on the nutritional/energy
value displays
e
.
KCAL: kilocalories
KJ: kilojoules
FAT: fat
CARB: carbohydrates
PROT: protein
CHOL: cholesterol
BE: bread
units