Silvercrest 368337 2101, Operating Instructions Manual

Page: 13 / 168

SDBB 2400 A1
■ 10
│
GB
│
IE
■ The control lamp
7
flashes while the appliance heats up. As soon as the set
temperature is reached, the control lamp
7
lights up.
■ To moisten the laundry, press the spray button
5
. This function is suitable
for very dry and very crumpled garments.
Steam ironing
NOTE
► The temperature control
6
must be set to at least the setting. Other-
wise, no steam will be produced.
■ Set the steam control
3
to the desired steam setting ( = no steam,
= maximum steam).
Ironing with steam blast
NOTE
► The temperature control
6
must be set to at least the setting.
Otherwise, no steam will be produced.
To generate the maximum quantity of steam, the steam control
3
must be
set to the highest level .
► The steam blast function is ideal for smoothing difficult-to-reach parts of a
garment.
1) Raise the steam iron slightly.
2) For a steam blast, press the steam blast button
4
.
Putting the steam iron down
WARNING! RISK OF FIRE!
► Never leave a hot steam iron unattended if it is switched on or connected to
the mains power supply.
1) Set the temperature control
6
to the
min
setting.
2) Stand the steam iron only on its base
9
.
After use
1) Set the temperature control
6
to the
min
setting.
2) Remove the plug from the mains power socket.
3) Stand the steam iron on its base
9
and allow it to cool down completely.
4) Empty the water tank via the filling opening
2
and clean the soleplate
0
(see section
Cleaning the housing and soleplate
).
5) Place the steam iron back on its base
9
.