Silvercrest 368337 2101, Operating Instructions Manual

Page: 15 / 168

SDBB 2400 A1
■ 12
│
GB
│
IE
Cleaning
RISK OF ELECTROCUTION!
► Always unplug the appliance before cleaning it.
There is a risk of electric shock!
RISK OF INJURY!
► Allow the appliance to cool down before cleaning it. Otherwise, there is
risk of burns!
Cleaning the housing and soleplate
ATTENTION! PROPERTY DAMAGE!
► Do not use abrasive, aggressive or chemical cleaning agents. They can
damage the surface and also lead to irreparable damage to the appliance.
■ Clean the housing with a soft, dry cloth only.
■ Clean the soleplate
0
using a damp cloth and a mild, non-scouring deter-
gent.
Self-cleaning function
1) Fill the water tank to the
MAX
marking.
2) Insert the plug into the mains power socket.
3) Set the temperature control
6
to the
max
setting.
4) Set the steam control
3
to the highest level .
5) Allow the steam iron to heat up until the control lamp
7
lights up perma-
nently.
6) Hold the steam iron horizontally over a sink or suitable container.
7) Press and hold down the
self clean
button
q
. Move the steam iron back
and forth a little. Steam and boiling water will flow from the steam holes in
the soleplate
0
. Any impurities that may be present are flushed out.
8) Release the
self clean
button
q
as soon as all of the water in the water tank
is used up.
9) Dry the soleplate
0
thoroughly. To do this, move the soleplate
0
back and
forth several times over a towel or an old piece of material.
10) Allow the steam iron to cool down before placing it in storage.