25
GB/IE
m
ATTENTION! Risk of property
damage!
Do not treat leather, velvet, impregnated
furniture or materials that are sensitive to
steam .
Do not touch materials that are sensitive
to heat (such as synthetic materials such
as polyamide or rayon) directly with the
hot steam nozzles
[
1]
. Only use the steam
smoothing function .
Connect the power plug
[
8]
to a suitable
power socket . Set the on/off switch
[
12]
to the
I
position .
LED
[
11]
Description
Flashing (blue)
Product warming up
Continuously on
(blue)
Product ready for steam
smoothing
Ejecting steam:
Push in
[
3]
.
m
WARNING! Risk of burns!
When steam smoothing, always point the
steam nozzles
[
1]
towards the clothes
(Fig . F) .
Never steam smooth clothes while they are
being worn .
Allow the clothes to cool down on a clothes
hanger before wearing them .
Slightly stretch the clothes with one hand .
Steam smooth the clothes by moving over
them with the brush
[
2]
. Keep your hands
away from the steam .
Apply light pressure on the clothes with the
brush
[
2]
. Move the brush back and forth in
a straight line .
NOTES:
After washing: Hang up the clothes (e .g . on
a clothes hanger) . The clothes thus dry with
fewer creases .
The product cannot produce strong creases
or a smooth, ironed appearance . For such
needs, an iron is more suitable .
While steam smoothing: The clothes absorb
moisture . Allow the clothes to dry completely
before storing them in your wardrobe .
Continuous steam operation
During continuous operation, hot steam exits out
of the steam nozzles
[
1]
without the need to keep
pressing in
[
3]
.
Continuous steam operation
Start continuous
operation
Press in
[
3]
. Move down
the lock
[
3]
.
Stop continuous
operation
Move up the lock
[
3]
.
If water drips out of the steam nozzles
[
1]
:
Pull up the lock
[
3]
. Release
[
3]
. The
products heats up now .
NOTES:
When the water tank
[
5]
is emptied during
continuous steam operation, the product
turns off automatically after approx .
40 seconds . The red LED
[
11]
flashes . Release
[
3]
. Fill water into the water tank (see
“Filling the water tank”) .
The product turns back on automatically
when the steam button
[
3]
is pressed .
