24 GB/IE
Operation
Filling/draining the water
tank
DANGER! Risk of electric shock!
Before filling the water tank
[
5]
: Disconnect
the power plug
[
8]
from the power outlet .
NOTES:
Fill the water tank
[
5]
with tap water or
distilled water without any additives . Use the
following mixtures according to your regional
water hardness:
Water hardness Water
Soft
Tap water
Medium hard
Distilled and tap water
(Ratio: 1:1)
Hard
Distilled water
Your local water utility can inform you
about your region's local water hardness .
The water tank
[
5]
has a filling capacity of
approximately 250 ml .
The
MAX
marking
[
7]
for the maximum
filling capacity applies when the water
tank
[
5]
is positioned vertically .
Filling the water tank
[
5]
:
Press the
release buttons
[
9]
. Pull the water tank out
of the product (Fig . C) .
Pour water via the water tank opening
[
4]
into the water tank . Do not exceed the
MAX
marking
[
7]
.
Close the water tank opening . Wipe off
water splashes . Reinsert the water tank into
the product (Fig . D) . The water tank clicks
into place audibly .
Draining the water tank
[
5]
:
Remove
the water tank . Pour out the water through
the water tank opening
[
4]
.
Removing/attaching the
brush
(Fig . E)
m
WARNING! Risk of burns!
Wait
until the product has cooled down before
removing or attaching the brush
[
2]
.
NOTE:
The product can be used with or
without the brush
[
2]
.
Removing the brush
[
2]
:
Carefully pull
the brush off the upper bracket .
Attaching the brush
[
2]
:
Press the
brush onto the steam nozzles
[
1]
. The upper
bracket must engage .
Steam smoothing clothes
Preparation:
Hang the clothes on a
clothes hanger or a rail .
m
ATTENTION! Risk of property
damage!
Before steam smoothing: Check
the ironing instructions to determine if the
clothes are suitable for use with this product:
Ironing instructions
Suitable
Yes
Yes
Yes
No
Ironing instructions can often be found on a
label sewn to the clothes .
If there should be no label: First try steam
smoothing on an inconspicuous piece of the
clothes .
