Silvercrest 359632 2101, Operating Instructions Manual

Page: 10 / 170

GB
│
IE
│ 7 ■ SSTME 600 B1
Operation
WARNING!
► The motor switches off automatically as soon as the blender
3
is removed
from the motor block
6
or the lid
2
is opened. In such cases it may be
easy to forget that the machine is still switched on. The motor will then start
unexpectedly as soon as the blender attachment
3
is fitted or the lid
2
is
closed again:
Therefore:
–
Do not insert the power plug into the wall socket until the blender
3
is
filled and mounted with its lid fitted and closed.
–
Before fitting the blender, always check to see that the appliance is
switched off or that the power plug has been removed.
–
Switch the appliance off first, pull the plug out and wait until the motor
has come to a standstill before removing the blender
3
or opening the
lid
2
.
Fitting and filling the blender
1) Rotate the blender
3
anticlockwise until the arrow
T
under the blender
handle is located above the position. Remove the blender
3
from the
motor block
6
in a vertical, upward motion.
2) Remove the lid
2
by rotating it anticlockwise towards position
(see Fig 1)
until you can pull it upwards.
3) Fill the blender
3
to at least to the lowest line of the scale
8
and at most to
the MAX mark. For optimum results, we recommend the following maximum
filling quantities:
Food
Max. filling
quantity
Recom-
mended
level
Recommended
processing time
Liquids 1750 ml 1‒3 60 sec.
Yoghurt-based drinks 1250 ml 2‒5 90 sec.
Milkshakes/
smoothies
1250 ml 2‒5 60‒90 sec.
Pancake mix 1250 ml 3‒5 90 sec.
Baby food 750 ml 5 3 min.
Mayonnaise
2 eggs
250 ml oil
3‒5 90‒120 sec.
Vegetable soup 1500 ml 3‒5 3 min.
Ice cubes
250 ml
(approx. 14‒15
pieces)
P 12x