GB
│
IE
│
9
■
SSTME 600 B1
Filling while in use
WARNING!
►
If you want to add additional foods during operation, use only the measuring
cap
1
provided for this purpose. Do NOT open the lid
2
.
►
Do not insert cutlery items or mixing tools into the blender
3
while the
appliance is in use. There is a considerable risk of injury if these come into
contact with the swiftly rotating cutting blades
4
!
To add more food while the appliance is in use, …
1) Remove the measuring cap
1
from the lid
2
.
2) Add the ingredients.
3) Press the measuring cap
1
back into the lid.
Removing the blender
Once you have finished processing the food in the attachment:
1) Always start by setting switch
5
to the off position (“0”) and pulling out the
mains plug.
2) Wait until the motor has come to a complete standstill before lifting the
blender
3
off the motor block
6
. Rotate the blender
3
anticlockwise until
the arrow
T
under the blender handle is located above the
position.
Remove the blender
3
from the motor block
6
in a vertical, upward motion.
Useful tips
■
To achieve the best results when puréeing firm ingredients, add small amounts
one after the other into the blender
3
rather than a single large portion.
■
When processing firm ingredients, cut them into small pieces (2 – 3 cm).
■
Add at least 50 ml of liquid when pureeing fruit or vegetables.
■
Add thicker ingredients (such as yoghurt) into the blender
3
first. If any of
ingredients are not picked up during mixing, remove the blender
3
from the
motor block
6
, remove the lid
2
and stir the ingredients with a suitable im-
plement, such as a spoon. Replace the blender
3
back on the motor block
6
with the lid
2
closed and continue mixing.
■
When mixing liquid ingredients, start off with a small amount of liquid. Grad-
ually add more liquids to the mixture through the measuring cap.
■
The appliance can be stabilised by placing your hand on top of the closed
blender during operation.
■
For stirring solid or very thick liquid foods, it can be useful to use level
P
to prevent the cutting blades
4
from blocking.
Summary of Contents for 359632 2101
Page 3: ......
Page 61: ... 58 FR BE SSTME 600 B1 ...