Silvercrest 359632 2101, Operating Instructions Manual

Page: 17 / 170

■ 14 │
GB
│
IE SSTME 600 B1
■ To remove stubborn dirt, you can remove the attachment
A
with the cutting
blades
4
from the blender jug
3
:
A
B
Fig. 3
1) Remove the blender
3
from the motor block
6
. For better stability, remove
the lid
2
by turning it anticlockwise towards the position (see fig 1)
until you can pull it off upwards.
2) Turn the appliance upside down and turn the attachment
A
with the cutting
blades
4
anticlockwise so that it can be detached from the blender jug
3
(see fig. 3).
WARNING! RISK OF INJURY!
► Handle the cutting blades
4
with extreme caution. They are very sharp.
3) Clean both parts thoroughly in a mild soap solution.
NOTE
If necessary, you can remove the sealing ring
B
from the attachment
A
with
the cutting blades
4
. Pull the sealing ring
B
out of the attachment
A
and
clean it in a mild soap solution. Then rinse off the sealing ring
B
in fresh
water.