Silvercrest 349710 2007, Operating Instructions Manual

Page: 45 / 188

43
GB
9.4 Turbo button
NOTE: the Turbo button 13 only works if
the speed control 12 is set to at least 1 .
• By pressing the Turbo button 13 you
can briefly increase the speed to the
highest setting
(10) .
• Use the Turbo button 13 to shred small
quantities of e.g. nuts, herbs or onions
in the blender jug
5 .
10. Dismantling the
device
DANGER from rotating parts!
~ Turn off the device and unplug the
mains plug
14 from the wall socket be-
fore disassembling the device.
10.1 Disassembling the
mixing bowl and
mixing tools
Lifting up the drive arm
1. Press the unlock button 11 and fold up
the drive arm 19 until it engages and
the unlock button 11 pops out again.
Removing the mixing tool
2. Push the mixing tool 20 / 21 / 22 slight-
ly upwards and turn it anticlockwise un-
til it can be pulled off the axle
23 .
Removing the splash guard
3. Turn the splash guard 18 towards the
open lock symbol until it can be re-
moved.
Removing the mixing bowl
4. Turn the mixing bowl 16 towards the
open lock symbol until it can be re-
moved.
Lowering the drive arm
5. Press the unlock button 11 and move
the drive arm 19 all the way down. The
unlock button 11 pops out again.
10.2 Disassembling the
blender jug
DANGER! Risk of injury from
cutting!
~
Please remember that the blades of the
blade assembly
7 are very sharp. Never
touch the blades with your bare hands in
order to avoid cuts.
~
Before removing the blade assembly 7 ,
rinse the blender jug 5 with water and
remove scraps of food from the blades
so that the blade assembly
7 can be re-
moved safely.
__349710_711_Kuechenmaschine_B8.book Seite 43 Mittwoch, 20. Mai 2020 2:06 14