Silvercrest 349710 2007, Operating Instructions Manual

Page: 43 / 188

41
GB
Mounting the blender jug
1. Reach into the recessed grip and re-
move the cover 8 upwards.
2. Position the blender jug 5 on the drive
unit 9 so that the white arrow (
T
) on
the bottom of the blender jug points to
the open lock symbol.
3. Turn the blender jug 5 clockwise until it
is firmly in place. The white arrow (
T
)
now points to the closed lock symbol.
Adding ingredients
• First add the liquid ingredients to the
blender jug 5 , and then the solid ones.
• Cut the solid ingredients into small piec-
es in advance, so that the pieces do not
get jammed in the blades.
• During blending, you can add ingredi-
ents through the refill opening 3 in the
lid 2 :
- Reduce the speed to 1 - 2 .
- Rotate the lid of the refill opening 1
anticlockwise and remove it.
- Add the ingredients.
- Replace the lid
1 such that the small
plastic nibs fit into the recesses at the
refill opening
3 .
- Turn the lid 1 clockwise until it is firm-
ly in place.
Mounting the lid
NOTES:
• For safety reasons, the blending process
will only start when the lid 2 is correctly
mounted.
• To make it a little easier to close the
lid 2 , place a few drops of cooking oil
onto a cloth and rub it over the seal 4 .
4. Place the lid 2 slightly distorted onto the
blender jug 5 .
5. Rotate the lid 2 clockwise until it stops.
The device is now fully assembled.
On working with the device: see “Basic op-
eration” on page 42.
__349710_711_Kuechenmaschine_B8.book Seite 41 Mittwoch, 20. Mai 2020 2:06 14