GB
│
IE
│
NI
│
CY
│
7
■
SFW 350 D5
5) Place your selected cutting disc
0
into the meat grinder casing
6
so that
the fixings on the cutting disc
0
are located in the openings in the meat
grinder casing
6
.
6) After everything has been correctly assembled, screw the ring clamp
q
back on hand-tight.
7) The ready-assembled meat grinder casing
6
is connected by a bayonet
connector to the motor unit
5
:
–
Insert the meat grinder casing
6
into the motor unit
5
such that the
arrow on the meat grinder casing
6
lies against the symbol
on the
motor unit
5
. The locking button
t
presses itself in (Fig. B).
–
Lightly press the meat grinder casing
6
in and at the same time turn
the feeding shaft on the meat grinder casing
6
into the middle position
(Fig. B) so that the arrow on the feeding shaft points to the symbol
.
When the meat grinder casing
6
engages, the locking button
t
springs out.
–
Finally, place the feeding tray
3
on top of the feeding funnel.
–
To dismantle it, press the locking button
t
and turn the feeding funnel to
the right (Fig. B)
. You can now pull the meat grinder casing
6
out.
Assembling the sausage stuffer attachment
Unfold the fold-out side - there you will find the step-by-step illustrations for
assembling the appliance.
1) Remove the meat grinder casing
6
as described under “Assembling the
meat grinder”.
2) Dismantle all parts which are fitted to/in the meat grinder casing
6
and
clean them.
3) Coat all metal parts with cooking oil.
4) Put the transport screw
7
, the spring
8
and the cross blade
9
back into
the meat grinder casing
6
.
5) Insert the sausage disc
e
so that the fixings on the sausage disc
e
are
located in the openings in the meat grinder casing
6
.
6) Then place the sausage stuffer attachment
w
before the sausage disc
e
.
7) Screw the ring clamp
q
on hand-tight.
8) Assemble the meat grinder casing
6
as described under “Assembling the
meat grinder”.
IB_336980_SFW350D5_GB_IE_NI_CY.indb 7
22.04.2020 12:03:24
