■
8
│
GB
│
IE
│
NI
│
CY
SFW 350 D5
Assembling the kubbe attachment
Unfold the fold-out side. There you will find the step-by-step illustrations for
assembling the appliance.
1) Remove the meat grinder casing
6
as described under “Assembling the
meat grinder”.
2) Disassemble any attachments that might be fitted and clean the meat grinder
casing
6
.
NOTICE
►
To use the kubbe attachment
r
, neither the cross blade
9
with the spring
8
,
nor a cutting or sausage disc
0
/
e
are required! Remove these from the
meat grinder casing
6
if necessary.
3) Coat all metal parts with cooking oil.
4) Insert the two plastic parts of the kubbe attachment
r
so that the fixings on
the bottom kubbe attachment
r
ring are located in the openings in the meat
grinder casing
6
.
5) When everything has been attached correctly, screw the ring clamp
q
back
on hand-tight.
6) Assemble the meat grinder casing
6
as described under “Assembling the
meat grinder”.
Assembling the biscuit attachments
Unfold the fold-out side. There you will find the step-by-step illustrations for
assembling the appliance.
1) Remove the meat grinder casing
6
as described under “Assembling the
meat grinder”.
2) Disassemble any attachments that might be fitted and clean the meat grinder
casing
6
.
NOTICE
►
To use the biscuit attachment
1
, neither the cross blade
9
with the spring
8
,
nor a cutting or sausage disc
0
/
e
are required! Remove these from the
meat grinder casing
6
if necessary.
3) Coat all metal parts with cooking oil.
4) Pull the pattern strips
1
away from the front of the biscuit attachment
1
.
5) First place the plastic disc and then the metal disc of the biscuit attachment
1
into the meat grinder casing
6
(see fold-out side). Insert the biscuit
attachment
1
. so that the fixings on the biscuit attachment
1
. are located in
the openings in the meat grinder casing
6
.
6) After everything has been correctly assembled, screw the ring clamp
q
back on hand-tight.
IB_336980_SFW350D5_GB_IE_NI_CY.indb 8
22.04.2020 12:03:24
