■
86
│
GB
│
MT
SEM 1100 B3
7) Once the cups are filled up to the required amount (about 20 ml per cup),
press the “Espresso” button
3
to stop the water being pumped through .
You can now drink the espresso .
8) Switch the appliance off with the on/off switch
1
.
NoTE
►
If no button is pressed, the appliance turns off automatically after 30 minutes .
9) After every use, remove the used espresso powder from the espresso sieve
i o
.
Remove the sieve holder
u
from the appliance . To do this, fold the sieve
blocker
z
upwards so that the espresso sieve
i o
cannot fall out of the
sieve carrier
u
. Now empty the espresso sieve
i o
by turning the sieve
holder
u
and the blocked espresso sieve
i o
over and knocking the
espresso powder out . Always dispose of the espresso powder in an environ-
mentally friendly manner, e .g . with the organic waste .
NoTE
►
Clean the hot water shower
r
(the hot water comes out of this) after each
use . See also the section "Cleaning and Care" .
NoTE
►
Empty the drip tray
w
regularly, at the latest when the red float
e
is visible
in the hole of the drip grille
q
.
Preparing cappuccino
WARNING
Be careful when working with steam for the milk froth production!
The hot steam or hot splashes can lead to injuries!
►
Always operate the steam control
7
slowly .
1) Fill a container for frothing (preferably made of stainless steel) to one third
with cold milk .
2) Ensure that the steam control
7
is closed (turn it as far as it will go in the
direction “ - “) .
3) Push the milk frother
0
out to the side . Always hold it by the handle
8
.
Summary of Contents for 296789
