SKGL 2000 A1
■
12
│
GB
│
IE
│
NI
│
CY
Operation
RISK OF BURNS!
Caution! Hot surface!
►
The surface of the appliance can become extremely hot during
use. Touch the appliance using only the handle.
NOTE
►
Unwind all of the mains cable from the cable retainer
when you use the
appliance.
1) Close the appliance lid using the handle.
2) Slide the fat drip tray
into the appliance.
3) Insert the plug into the mains power socket. You will hear a beep and "OFF"
will appear on the display
. The display lights up blue and goes out
automatically after 1 minute if no further entries are made.
4) Switch on the appliance using the On/Off button
. The display
lights up blue, there will be a beep and the appliance starts to heat up to
the preset temperature of 90°C (keep-warm mode). Once the temperature
has been reached, you will hear three beeps and the green "Ready" control
lamp
lights up. The light element
lights up blue during operation.
5) Press T/MIN button
and set the desired temperature (90–230°C) by
pressing the "+"
and "-" buttons. If the set temperature has not yet been
reached, the green "Ready" control lamp
goes out and the appliance heats
up. If the appliance has already reached the set temperature, you will hear
two beeps and the green "Ready" control lamp
will light up.
6) If required, press the T/MIN button
again to adjust the heating duration
(1–90 min.) using the "+"
and "-" buttons. The green "Ready" control
lamp
lights up again as soon as the set heating level is reached and the
temperature is maintained. As soon as the heating period is over, you will
hear two beeps and the appliance will switch back into keep warm mode
(90°C). The appliance switches off automatically after 1 hour if no entries
are made.
7) Switch the appliance off by pressing the On/Off button
and pull the
mains power plug from the wall socket.
Summary of Contents for 290943
Page 3: ...A B ...
Page 33: ...SKGL 2000 A1 30 GB IE NI CY ...
Page 63: ...SKGL 2000 A1 60 GR CY ...
Page 93: ...SKGL 2000 A1 90 DE AT CH ...