SFE 450 C1
GB
│
IE
│
NI
│
CY
│
9
■
2) Hold the pusher
1
in one hand and feed the fruit or vegetable pieces with the
other hand into the feed tube
2
. Always use the pusher
1
to carefully press
the fruit/vegetable pieces into the feed tube
2
. While the fruit/vegetables
are being processed, insert further pieces into the feed tube .
Do not switch the appliance off .
NOTE
►
Add carrots one after the other into the feed tube
2
: the top of the carrot
must be at the bottom and the pointed end at the top .
NOTE
►
To avoid fruit or vegetables becoming blocked in the feed tube
2
, only
fill it when the appliance is switched on . If fruit or vegetable pieces get
stuck in the feed tube
2
and cannot be promptly freed with the pusher
1
,
proceed as follows to avoid damage to the appliance:
–
Switch the off appliance immediately and pull the power plug
8
from the wall socket .
–
Undo the clamps
4
and remove the lid
3
.
–
Remove the fruit or vegetable pieces causing the blockage .
–
Reassemble the appliance and continue with juice extraction .
3) Always switch the off appliance immediately after all of the fruit/vegetables
have been processed .
CAUTION! PROPERTY DAMAGE!
►
To avoid blockage of the juice outlet
6
and/or damage to the appliance,
clean the juice outlet
6
and the juice tank
5
regularly and after every
use .
Emptying the pulp container and the filter
■
You can extract juices continuously until the container for fruit and vegetable
pulp
q
is completely full .
WARNING! RISK OF INJURY!
►
Remove the plug
8
from the power outlet when emptying the filter
w
.
This prevents unintentional starting of the appliance .
If the extracted juice suddenly starts getting thicker, or if you hear that the motor is
running more slowly, the filter
w
needs to be emptied . When you have removed
the fruit pulp, reassemble the appliance .
Summary of Contents for 289602
Page 3: ...A B ...
