Silvercrest 288190, Operating Instructions Manual

Page: 14 / 107

12 GB
Mounting the lid
NOTES:
• For safety reasons, the blending process
will only start when the lid | 2 is correctly
mounted.
• To make it a little easier to close the
lid | 2 , place a few drops of cooking oil
onto a cloth and rub it over the seal | 4 .
4. Place the lid | 2 slightly distorted onto the
blender jug | 5 .
5. Rotate the lid | 2 clockwise until it stops.
The device is now fully assembled. On work-
ing with the device: see “Basic operation”
on page 12.
9. Basic operation
9.1 Power supply
1. Assemble the device for the desired
function.
2. Check that the speed control | 11 is set
to 0 (off).
3. Plug the mains plug | 13 into a suitable
wall socket. The wall socket must contin-
ue to be easily accessible after the de-
vice is plugged in.
4. Pull out the mains plug before cleaning
the device.
9.2 Switching the device on/
off and selecting speed
WARNING! Risk of material damage!
~
The mixing mechanism must not be op-
erated continuously for longer than
10 minutes, or the blender for longer
than 3 minutes. You must then allow the
device to cool down to room tempera-
ture.
NOTE: the device only works when either
the cover | 8 is mounted (for the mixing tools)
or the lid | 2 is correctly mounted on the
blender jug | 5 .
1. Switch the device on by turning the
speed control | 11 to the right.
2. Start at a slightly lower speed, and
slowly increase to the desired speed
(see “Overview of functions” on
page 9).
3. Reduce the speed to setting 1 - 2 when
you are adding ingredients during oper-
ation through the filling opening
| 20 or
the refill opening | 3 .
4. Set the speed control | 11 to 0 to switch
the device off.
__288190_Kuechenmaschine_Profi_B6.book Seite 12 Montag, 7. August 2017 11:09 11