SilverCrest SHBD 600 A1
12 - English
In order to fit one of the six comb attachments (12), push them carefully onto the blade block
(1) of the hair & beard trimmer until both prongs of the comb attachment (12) on the right and
left lock into the recesses on the hair & beard trimmer. To remove a comb attachment (12),
remove the prongs on the left and right from the recesses on the hair & beard trimmer and take
off the comb attachment (12).
Please note: The comb attachments (12) need to be fitted so that the teeth of the comb
attachments (12) are pointing in the direction in which the hair & beard trimmer moves.
7. Initial use
7.1. Cutting hair
The hair & beard trimmer can be used either in battery mode or with a connected mains
adapter (6).
DANGER!
Take care when shaving areas of the body with thinner skin (for
example, armpits or pubic area). There is a risk of injury.
The hair being cut must be dry.
Firstly, familiarise yourself with the hair & beard trimmer and try to hold it so that the
on/off button (3) can be easily pressed. Please make sure that it rests securely in your
hand.
Give your hair a good comb through.
If necessary, use a comb attachment (12) to achieve the desired cutting length.
If you are not sure which comb attachment (12) you should use, start with the
largest (28----30 mm) first and then change to a smaller comb attachment (12) if you
need to.
