SilverCrest SHBD 600 A1
10 - English
The hair & beard trimmer must not be exposed to
excessive shocks or vibrations.
No foreign bodies should penetrate into the hair & beard
trimmer.
5. Copyright
All contents of these operating instructions are subject to copyright law and are provided to the
user solely as a source of information. Any form of copying or reproduction of data and
information without the express written permission of the author is prohibited. This also concerns
commercial use of the content and data. The text and illustrations correspond to the technical
standards at the time of printing. Subject to alterations.
6. Before initial use
Remove the hair & beard trimmer from the packaging and remove all packaging materials
completely. Check the hair & beard trimmer for signs of damage. If the hair & beard trimmer is
damaged, it must not be put into operation.
6.1. Charging the battery
Before initial start-up or if the built-in battery is flat, charge up the device as follows:
Firstly, connect the mains adapter port (5) of the hair & beard trimmer to the small plug on the
cable of the mains adapter (6) and then insert the mains adapter (6) into an easily accessible,
live power socket.
The display (4) will indicate the current charge level of the battery as a percentage during the
charging process. As soon as the number “
100”
is shown on the display (4), the battery is
fully charged.
Regardless of the charge level of the battery, the hair & beard trimmer can be used
at any time by via mains operation.
