Silvercrest 277727, Operating Instructions Manual

Page: 24 / 64

GB │ IE │ NI │ 21 ■ SEMM 1470 A1
12) Switch the appliance off using the on/off switch % .
13) Clean the appliance as described in the section “Cleaning and Care”.
NOTE
► If you do not turn off the appliance with the on/off switch % , the appliance
will switch itself into power saving mode automatically after approx. 15
minutes if no other button is pushed. If you want to make another drink,
simply press any button. The appliance heats back up.
Changing the duration of the milk froth output
NOTE
► You can adjust the amount of the milk froth by turning the "Milk quantity"
knob
and also the duration of the milk output. The further you turn the
"Milk quantity" knob toward " " the more milk/milk froth will come
out of the milk nozzle during the same amount of time. Make sure you
do not turn the "Milk quantity" knob further than the " " marking.
Otherwise you will be in cleaning mode (see section "Cleaning and care").
You can customise the duration of the milk froth output for the programmes
“Small latte” and “Large latte”.
“Small” latte
–
Press and hold the “Small” latte button
3
for about 3 seconds until
the pump starts to work. Milk froth comes out of the milk nozzle.
–
Once the desired quantity of milk froth has been produced, stop milk
froth production by pressing the “Small” latte button
3
again. You
can set a duration of 5–70 seconds.
–
Following the milk froth production, the espresso comes out of the
espresso outlet
-
to prepare the latte macchiato.
–
The next time you prepare a latte macchiato using the “Small” latte but-
ton
3
the newly programmed duration will be used for milk output.