GB
│
IE
│
NI
│
23
■
SEMM 1470 A1
Cleaning and care
WARNING – RISK OF INJURY!
■
Always remove the plug from the mains power socket before you clean the
appliance. Danger of electric shock!
Never immerse the appliance in water or other
liquids. Danger of electric shock!
■
Always allow the appliance to cool down before cleaning it. Risk of burns!
Cleaning the milk nozzle and milk tank
CAUTION – PROPERTY DAMAGE
■
Never use abrasive, aggressive or chemical cleaning agents to clean the
appliance. These could damage the outer surfaces of the appliance.
1) Switch the appliance off using the on/off switch
%
and pull the mains plug
from the wall socket.
2) Remove the milk tank
from the appliance and take off the milk tank lid
.
3) Clean the milk tank lid
and the milk tank
in warm water with a little
mild washing-up liquid.
4) Rinse both parts off with clear water and then dry them well.
5) Fill the milk tank
with water (approx. 100 ml), replace the milk tank lid
and push the milk tank
back into the appliance.
6) Place a suitably large, empty container onto the drip grille
and move the
milk nozzle
so that it points into the container.
7) Insert the plug into a mains power socket and switch on the appliance using
the on/off switch
%
.
8) Wait until all control lamps light up permanently.
9) Set the “Milk quantity” knob
to the position “Clean”
.
10) Press the “Large” latte button
2x in a row. The control lamps of
the “Large”
and “Small” cappuccino buttons
!
, as well as the
“Large”
and “Small” latte buttons
3
flash alternately and hot
steam comes out of the milk nozzle
.
Summary of Contents for 277727
Page 3: ...A 0 6 1 B C 3 ...
